Results 1 to 3 of 3

Thread: Help with pin configurations

  1. #1
    Automated Home Lurker
    Join Date
    Dec 2013
    Posts
    2

    Default Help with pin configurations

    Hi

    I am coming out of the back of a DVR on the VGA port. plugging in a RJ45 converter and I then have a cat 6 cable buried in the wall to my TV. I then some how need to get the cat 6 cable either on to a scart plug or a component cable. This is were I am struggling.

    Please help??????????????????????????????????

  2. #2
    Moderator toscal's Avatar
    Join Date
    Oct 2005
    Location
    Near Alicante Spain
    Posts
    2,008

    Default

    So you have VGA to RJ45 at one end and at the other end is where you are stuck.
    The main problem is that as its VGA going in it so it will be VGA coming out the other end. It is possible if the TV scart socket supports it. You can get VGA to scart leads, you will also need to make sure its a scart in Lead and not scart out..
    Another option which will work is to get a PC VGA to TV converter. Amazon do one for about 11 pounds.
    Last edited by Otto-Mate; 12th December 2013 at 01:06 PM.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
    www.casatech.eu Renovation Spain Blog

  3. #3
    Automated Home Lurker
    Join Date
    Dec 2013
    Posts
    2

    Default

    Thank you

    Unfortunately the TV does not have a pc connection, could this be done making the cat 5 to component instead of scart

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •