If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
@Honeywell: It isn't very 2016 to have us sniff and reverse engineer your API! Please provide some information and guidance in the discussion above first, and include Evohome in your Connected Home open API program (https://developer.honeywell.com/) quickly?
+1
I tried contacting Honeywell the other week to see if I could get some official documentation and an application Id for my SmartThings app, but all they did was direct me to this thread.
Use the app on iOS and set the proxy server entry field on the device to point to Charles. You may be best speaking to Honeywell though to gain access to the v2 API.
Hi folks, just wanted to say a quick thank you to the folks who put the hard work in on this project. My evohome gear was installed last week and I've just got monitoring set up. It's little python script based on Bill M's "Dummy's Guide" that outputs setpoint and temperature readings per zone every 5 minutes to an ELK stack running on an OS X server. ELK's probably a bit of overkill for this sort of application but it's what I know and use a lot at work (and I already have a server running it for other uses).
Hi WiteWulf we will be moving to another house around August this year and are currently installing an Evohome. Could you tell me where I could find Bill M's dummy guide. I would like to setup some monitoring. Thanks for pointing me in the right direction.
Hi WiteWulf we will be moving to another house around August this year and are currently installing an Evohome. Could you tell me where I could find Bill M's dummy guide. I would like to setup some monitoring. Thanks for pointing me in the right direction.
Ummm...did something break this afternoon? My scripts are all failing on 'no JSON object could be decoded', and trying to bring up 'https://rs.alarmnet.com/TotalConnectComfort/WebAPI/api/Session' in a browser I get a 503 error. I was polling data quite happily until just before lunchtime.
The app on my iPhone is still working fine, though...I think that v1 API just got retired!
Times passes...
Yup! Just changed my app to use the newer urls mentioned a few pages back (tccna.honeywell.com/WebAPI/api/) and it's working again now
I want to add my thanks to everyone here for the really great work that has been done. If anyone is interested I have a couple of things that may be of use to others. 1. I have created a very simple python script that pulls the zone temperatures and set points and pushes them up to Emoncms.org for graphing, recording and monitoring. I use this site to also monitor my solar, electric and gas usage. The python is only a half dozen lines long and runs on a PI.
The other thing that I have done is to translate the the backup and restore scripts to use only Windows Powershell. The only difference is that i output to a tab seperated file that can easily be opened in Excel. This lets me play with the setting in a nice easy format to copy schedules between zones etc and then re upload back into Evohome.
Comment