Originally posted by William
View Post
Decoded - EvoHome API access to control remotely.
Collapse
X
-
Originally posted by 03397 View PostThanks for your reply.
...
but I am getting this
[24.02.2021] [10:54:30] [DEBUG] [QUICKAPP195]: Full date 2021-02-24T11:24:30
[24.02.2021] [10:54:31] [DEBUG] [QUICKAPP195]: [ { "code": "ForbiddenParameter", "message": "'CoolSetpoint' is forbidden."
[24.02.2021] [10:54:31] [DEBUG] [QUICKAPP195]: response status: 400
I am pretty sure the there is something wrong with the values of the body but I did not manage to find anything.
Your help will be really appreciated.
Comment
-
-
Hi all, I've only recently found this thread and am experimenting with the Evohome Client API which seems really easy to use, even for a newbie like me . I'm noticing recently some radiator valves seem to take a long time to re-establish connectivity with the Evohome controller after it restarts, which makes me wonder how well they are communicating generally. Based on the data coming back from the Evohome Client I'm assuming that when a sensor has a temp of 128.0 that it has failed to get a reading from that sensor. Does anyone know a way of finding the last time a sensor successfully communicated with the controller? Would be good to be able to track that to see how well each sensor is working.
Thanks.
Comment
-
-
IMHO, the state-of-the-art is: https://github.com/zxdavb/ramses_rf
It will tell you everything.
You will need a HGI80, or (better) something running https://github.com/ghoti57/evofw3
...such as one of these (recommended): https://indalo-tech.onlineweb.shop/S..._21584696.aspx
Comment
-
-
Originally posted by zxdavb View PostIMHO, the state-of-the-art is: https://github.com/zxdavb/ramses_rf
It will tell you everything.
You will need a HGI80, or (better) something running https://github.com/ghoti57/evofw3
...such as one of these (recommended): https://indalo-tech.onlineweb.shop/S..._21584696.aspx
c3e7f1a9d74a1fc26868bdaeb4fe2e60779ec683.jpg
Last edited by hendersonm66; 20 September 2022, 02:07 PM.
Comment
-
-
@hendesonm66 That's pretty impressive!
I should note that the latest version of evogateway uses ramses_rf.
For those just starting out, it may be much less complex to use ramses_cc on HA (written by me too) - it is tightly coupled with ramses_rf and both are under constant development.
Doing so will negate the need for the additional layers of MQTT, evogateway, node-red, etc.
Also, my understanding of evogateway is that it is mostly sensor-level, that is: no zone control, etc.?
For example, evohome_cc will let you do:
- sensor faking (using a non-Honeywell room thermometer),
- upload/download schedules (even for DHW)
- get alerts when things go wrong (i.e. the RF gateway stops responding)
With HA, people have done this:
... and:
Comment
-
-
Originally posted by zxdavb View PostIMHO, the state-of-the-art is: https://github.com/zxdavb/ramses_rf
It will tell you everything.
You will need a HGI80, or (better) something running https://github.com/ghoti57/evofw3
...such as one of these (recommended): https://indalo-tech.onlineweb.shop/S..._21584696.aspx
Comment
-
-
Originally posted by MikeyMan View PostAnyone else having issues with Evohome atm?
Since yesterday Domoticz throws some errors:
2022-10-03 14:22:45.605 Error: Domoticz(pid:25582, tid:25598('Evohome')) received fatal signal 6 (Aborted)
Comment
-
-
Originally posted by MikeyMan View PostYet it is crashing very hard
But with hardware turned off no problem at all.
Are you also using Domoticz?
Comment
-
-
I understand your frustrations. If i had the choice now, i'd probably opt for an alternative.
On this specific item though, i did manage to fix it.
Might help others.
Seems i've pressed a button too many and added a 'hot water' steering.
Took a while to figure it out. But it was fixed quite simple.
I've deleted the installation from mytotalconnectcomfort.
Somehow at the moment the login is only available in UK and Ireland. But it works.
There i've deleted and re-added the installation. Everything is working fine now.
Comment
-
-
So the old key still works?
Don't really know about the hot water device (`DHW`). I don't have one myself but I know people have been running the EvohomeWeb module with DHW for quite some time. Reason that I know is because I was granted access to one such user's totalconnect account because initially there was indeed a problem with the part of the code that processed the DHW info.
Comment
-
Comment