Results 1 to 3 of 3

Thread: CBUS connection problem

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Lurker
    Join Date
    Feb 2014
    Location
    Sutton Bridge Lincolnshire
    Posts
    6

    Default CBUS connection problem

    Hi every one,

    I am hoping that someone can help with a communication issue.

    I have set up a serial to Ethernet convertor on my home network, connected to my 5100T telephone interface and struggled to connect. I then used a usb to serial directly from my laptop everything connected was able to program units. Next step I tried the Ethernet/serial device again and i was straight in.

    Here is where the trouble started ever since going back to using it no connection over the Ethernet but no problem locally. So I thought I would use the CBUS diagnostic utility with the Ethernet connection and everything works fine can connect and send all on all off commands. So I am at a loss as to why i can not connect the toolkit over the serial /Ethernet maybe some one has had the same problem and can help.

    Andy
    Last edited by barranak; 21st May 2014 at 08:47 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •