I have a Honeywell Hometronic system installed in my house with a Hometronic Manager HCM 200D controlling everything, 16 rooms with 23 Honeywell HR80s on the radiators (some rooms have 2 radiators), linked back to the boiler with a HS 30 switch for the hot-water (manual operation from the HS30 and timed operation from HCM 200D where I have a device set up as 'hot water') and a HC60NG controller for the central heating (manual control on HC60NG, boiler feedback from operation of the HR80s and automated control from the HCM 200D).
We have set up a device as 'hotwater' on the HCM 200D and then have bind the HS 30 to the HCM 200D / device / hotwater
We have bind the HC60NG to the HCM 200D to Boiler demand / boiler relay
We had our boiler replaced with a larger boiler, and I although I have run some tests to make sure that the HS 30 switches the hot water on and off when activated from the HCM 200D, I am now finding that the HS 30 is not consistently coming on when set for the morning or the afternoon. On the HCM 200D the programme is clearly set as 'on' for hot water as per the program.
1) Just wanted to confirm that I don't also have to bind the HS 30 to Boiler demand / switching module, and
2) Could it be that the signal is being blocked by the larger boiler
3) Any other tips as to how to get this working again?
We have set up a device as 'hotwater' on the HCM 200D and then have bind the HS 30 to the HCM 200D / device / hotwater
We have bind the HC60NG to the HCM 200D to Boiler demand / boiler relay
We had our boiler replaced with a larger boiler, and I although I have run some tests to make sure that the HS 30 switches the hot water on and off when activated from the HCM 200D, I am now finding that the HS 30 is not consistently coming on when set for the morning or the afternoon. On the HCM 200D the programme is clearly set as 'on' for hot water as per the program.
1) Just wanted to confirm that I don't also have to bind the HS 30 to Boiler demand / switching module, and
2) Could it be that the signal is being blocked by the larger boiler
3) Any other tips as to how to get this working again?
Comment