Results 1 to 10 of 13

Thread: Good looking Z-Wave Wallplates ?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Oct 2014
    Location
    Leicestershire, UK
    Posts
    3

    Question Good looking Z-Wave Wallplates ?

    Good Morning All

    My first post, having spend a lot of time reading through the various entries here, all very interesting and has helped a lot so far.

    I have spent a lot of time researching products for a small amount of home automation that I would like to install, it does not justify engaging an installer or the high end systems. As a result I have found the selection of products available to the DIY’er are quite limited. I am looking to use a technology that is likely to have future scalability and availability so am looking at Z-Wave (any other suggestion ?). My challenge is to upgrade the lighting in 2 rooms, fairly simple requirements. Ability to turn lights on at the door, selecting a scene would be good, lights to be controller are ceiling and table lamps etc. Also want other controls, in one room it can be a simple hand held remote, in the other room I wanted to replicate the wallplate, so there will be 3 that are similar or the same as the one by the door. I can deal with the dimmers themselves (plug in or in wallboxes etc), there are lots to choose from but I am stuck with the wall plate devices. Unless I spend over £300 each it would appear there is nothing that is aesthetically pleasing and functional. It would seem you can get white plastic wallplates (switches/dimmers) for about £40, but nothing that is brushed stainless or similar. If you consider the incremental cost of a nicely finished manual switch, they are about £20 more expensive, but as soon as you want Z wave as well the price is sky high, perhaps due to low production volumes ? I have seen some really nice ones (Vitrum or MK Astral) but with prices to match, in the case of Vitrum, these are in a class of their own on looks, but the MK is not special. I have found a number of other products outthere but no distributors so I guess they are available to installers only, is this the case with a lot of Z-wave kit ?

    If I compromise on the technology, selection of Z wave then LightWaveRF looks good, but single source and lack of status reporting (future expansion requirements)

    Does anyone have any suggestions for nice looking Z wave wallplates that are reasonably priced (maybe up to £150 each ?) or another route I could go down ?

    Thanks

  2. #2
    Automated Home Lurker
    Join Date
    Oct 2013
    Posts
    17

    Default

    zwave dimmers and lightwaveRF wireless switches is my choice given the same dilemma. In my case all run off a MacMini (which I had "spare") running Indigo with a Aeotec (I think) zwave card and an rfxtrx 433 (to be upgraded to 433e if I ever convince the wife about Somfy blinds).

    Still only at the testing stage (heating is the priority) but looking good so far.

    As you say the lightwave stuff is the only attractive but moderately priced thing out there (and the mood controllers give great flexibility) and two way communication isn't really necessary for a switch.

  3. #3

    Join Date
    Oct 2014
    Location
    Leicestershire, UK
    Posts
    3

    Default

    Thanks Wysinawyg

    From my reading of various posts here and looking at the massive amount of info on the net I am coming to the conclusion that alot of home automation seems to be a mix of technologies and some clever glue to hold it all together, which is I guess why installers charge so much for complete solutions, it takes some effort and knowledge/experience. For me that actully makes it more interesting and challenging amd I'm willing to get stuck in, I was looking for a Rasperry Pi project, this might be it ! Pity I don't have a huge amount for time for it at this stage.

    The plan is eventually to expand into other areas of the house and also other systems like heating etc. with remote control when away from home, which was why z wave was my technology of choice. The point on 2 way communication as you say is not that important on lighting when you are present, but anything operated remotely does need an element of feedback in order to re-issue a missed command or even to know what state something was left in.

    Something I have learnt since my post is that I could use something like a Fibaro dimmer module in the existing wall boxes and wire in a momentary switch to provide z-wave inputs, this could be dual gang, so 2 inputs I just need to find some nice looking momentary switches which should be easier and more cost effective.... However I still have the challenge where there is not a power feed, wanting a consitant look to each of the wallplates the LightwaveRF mood controllers are still looking good.

  4. #4
    Automated Home Sr Member Quinten's Avatar
    Join Date
    May 2004
    Posts
    85

    Default

    Why not use a Fibaro dimming module and your own choice of wall switch?

  5. #5
    Automated Home Lurker
    Join Date
    Oct 2013
    Posts
    17

    Default

    The issue for me is that I want mood switches. The LightwaveRF mood switch gives you six functional buttons to set scenes vs the Fibaro which gives you two. Yes you can double click and things in software to give you some elements but its not really what I'm after in terms of simplicity with flexibility.

  6. #6
    Automated Home Lurker
    Join Date
    Sep 2013
    Location
    Newcastle Upon Tyne
    Posts
    7

    Default

    What about a fibaro universal sensor wired into a couple of spare (isolated) switches? It's something I've been thinking of doing to replace my LWRF master switches that are hit and miss in reliability.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •