I could really do with some advice about my woes with the Evohome system.
I have a system boiler setup with an unvented cylinder. I have 2 motorised valves controlling the hot water and the central heating. I have the base pack, 5 trvs for all the rads and a hot water kit. My plumber connected them all up apart from the hr 92s last week and the hot water was working perfectly.
However now I can't get anything to work properly. I reset all the bits and went through the binding process as in the instructions but can't turn the hot water on or off. I can manually turn it on but then it flips off with also the brd91 that connects to the rads.
I have spent hours trying resetting and binding last night but without any success.
I think I'm getting confused with the hot water configuration. I can bind the thermostat and then it says the brd 91 pairs but should I be using the hot water valve option or the 2 or 3 port valve options.
Also how do I bind the rads brd91? I mean in what option do I do this?
Do I need to use the boiler relay option?
Many thanks for your help with this as it is driving me mad!!!
I have a system boiler setup with an unvented cylinder. I have 2 motorised valves controlling the hot water and the central heating. I have the base pack, 5 trvs for all the rads and a hot water kit. My plumber connected them all up apart from the hr 92s last week and the hot water was working perfectly.
However now I can't get anything to work properly. I reset all the bits and went through the binding process as in the instructions but can't turn the hot water on or off. I can manually turn it on but then it flips off with also the brd91 that connects to the rads.
I have spent hours trying resetting and binding last night but without any success.
I think I'm getting confused with the hot water configuration. I can bind the thermostat and then it says the brd 91 pairs but should I be using the hot water valve option or the 2 or 3 port valve options.
Also how do I bind the rads brd91? I mean in what option do I do this?
Do I need to use the boiler relay option?
Many thanks for your help with this as it is driving me mad!!!
Comment