My CH system is a boiler feeding 3 zone valves
Zone 1 – hot water still connected to original CH timing clock – works well no need to change
Zone 2 – central heating 13 rads in all 11 of them fitted with HR80 TVRs split into 4 zones with 2 CM67z controllers both bound to a HC60NG which controls the zone valve – all works well but would like more control especially of bedrooms
Zone 3 – single loft room with UFH controlled by battery powered wall mounted programmable thermostat (Heatmiser PRBT) wired to the zone valve– would like to integrate this into Evohome
Can I simply replace the 2 CM67zs with an Evohome controller and bind it to the HC60NG?
What would I need for the loft UFH – presumably the single zone thermostat will need a BDR91 as would a DT92 or is there something else that could be integrated?
Cheers, Andy
Zone 1 – hot water still connected to original CH timing clock – works well no need to change
Zone 2 – central heating 13 rads in all 11 of them fitted with HR80 TVRs split into 4 zones with 2 CM67z controllers both bound to a HC60NG which controls the zone valve – all works well but would like more control especially of bedrooms
Zone 3 – single loft room with UFH controlled by battery powered wall mounted programmable thermostat (Heatmiser PRBT) wired to the zone valve– would like to integrate this into Evohome
Can I simply replace the 2 CM67zs with an Evohome controller and bind it to the HC60NG?
What would I need for the loft UFH – presumably the single zone thermostat will need a BDR91 as would a DT92 or is there something else that could be integrated?
Cheers, Andy
Comment