evohome S Plan Plus – how do I control more than one heating zone valve?
Ideally you should simplify the installation however in certain cases it is possible to control an S Plan plus system
CAUTION ADVANCED APPLICATION - to be read in conjunction with installation manual and youlearn module. Intended for experienced evohome specialists.
Either wire both/all heating zone valves into the Heating relay (n.b. they will all open on a heat demand from any zone)
Or
Bind multiple relays in at Heating valve in the Guided Config.
All relays need to be in listening mode when the binding signal is sent from the evohome controller.
(n.b. they will all open on a heat demand from any zone)
Hope this makes sense, any questions please ask away
Ideally you should simplify the installation however in certain cases it is possible to control an S Plan plus system
CAUTION ADVANCED APPLICATION - to be read in conjunction with installation manual and youlearn module. Intended for experienced evohome specialists.
Either wire both/all heating zone valves into the Heating relay (n.b. they will all open on a heat demand from any zone)
Or
Bind multiple relays in at Heating valve in the Guided Config.
All relays need to be in listening mode when the binding signal is sent from the evohome controller.
(n.b. they will all open on a heat demand from any zone)
Hope this makes sense, any questions please ask away
Comment