I have a solid red light, with the occasional green flash on my RAD's BDR91. This is a new install so starting everything fresh.
The unit is installed a full 400mm from anything metal, and the BDR91 400mm away controlling the hot water seems to be working fine.
I have tried a full reset (pressing & holding for 15secs) several times, as well as full reset on the Evohome controller, and deleting the RAD zones etc.Nothing seems to clear it.
Binding the RAD controllers to it, fails to work/do anything.
Any suggestions?
Thanks
The unit is installed a full 400mm from anything metal, and the BDR91 400mm away controlling the hot water seems to be working fine.
I have tried a full reset (pressing & holding for 15secs) several times, as well as full reset on the Evohome controller, and deleting the RAD zones etc.Nothing seems to clear it.
Binding the RAD controllers to it, fails to work/do anything.
Any suggestions?
Thanks
Comment