Page 4 of 4 FirstFirst 1234
Results 31 to 32 of 32

Thread: Comms fault , living room, actuator

  1. #31
    Automated Home Jr Member
    Join Date
    Nov 2016
    Posts
    17

    Default

    Quote Originally Posted by HenGus View Post
    I would delete both zones on the controller, and then UNBIND the 4 HR92s just to make sure. Re-build the zones as per the Evohome instructions.
    Sorry to ask an obvious question but how do I properly unbind?
    Think I did it wrong thing first time, thanks? Also I've just did an rf. Comms check on all my zones and they all came back negative which concerns me as system is working fine.. Thanks again..

  2. #32
    Automated Home Legend
    Join Date
    May 2014
    Posts
    998

    Default

    Quote Originally Posted by FUNKYDADDIO View Post
    Sorry to ask an obvious question but how do I properly unbind?
    Think I did it wrong thing first time, thanks? Also I've just did an rf. Comms check on all my zones and they all came back negative which concerns me as system is working fine.. Thanks again..
    Clearing binding at the HR92

    1. Press the button.

    2. Hold the button pressed for 5 seconds.

    3. Select bind using the adjustment dial and keep the
    button pressed until cleared is displayed. Binding is deactivated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •