Page 13 of 15 FirstFirst ... 389101112131415 LastLast
Results 121 to 130 of 144

Thread: New Firmware (2.1) for evohome Wi-Fi coming soon

  1. #121
    Automated Home Jr Member
    Join Date
    Feb 2015
    Posts
    22

    Default

    @Muzz The PSU for my RFG100 died a few months ago. Honeywell support sorted me out a new one FOC so you may want to contact them if you haven't already. Am sure my installer mentioned that the PSU was known to fail - All my Evohome kit was installed circa May 2014.

  2. #122
    Automated Home Lurker
    Join Date
    Oct 2014
    Posts
    8

    Default

    Count me in for the change over at a fair price

  3. #123
    Automated Home Lurker jhstaal's Avatar
    Join Date
    Oct 2015
    Posts
    1

    Default

    After a very promising post about a trade-in en a lot of replies it became a bit silence here. I hope we can count on some affordable and reasonable trade in for the EVO-home main-unit, the WiFi-Gateway and the wall-mount plate.
    Just for the records: count me in for all three of them (and yes I know the new WiFi-model has both the control-unit and the gateway. I just mentioned both to emphasize the cost already made)

  4. #124
    Site Sponsor The EVOHOME Shop's Avatar
    Join Date
    Dec 2014
    Location
    Powys, Mid Wales
    Posts
    479

    Default

    Hi Guys,

    The trade in deal is now happening this weekend (25th - 28th March 2016) please see this post (http://www.automatedhome.co.uk/vbull...e-25-3-gt-28-3) and any comments or questions please post on there.

    Many thanks,

    Richard
    Last edited by The EVOHOME Shop; 24th March 2016 at 11:13 PM.

  5. #125
    Automated Home Jr Member
    Join Date
    Nov 2014
    Posts
    49

    Default

    Quote Originally Posted by MrShamus View Post
    @Muzz The PSU for my RFG100 died a few months ago. Honeywell support sorted me out a new one FOC so you may want to contact them if you haven't already. Am sure my installer mentioned that the PSU was known to fail - All my Evohome kit was installed circa May 2014.
    Mine also died a few months ago, I contacted Honeywell who kindly sent me a replacement one.

    I found that keeping the PSU disconnected from power for hours or a day would allow me to plug it back in and it'd work again until the next time the power was removed. I did that for many months until it finally died.

  6. #126
    Site Sponsor The EVOHOME Shop's Avatar
    Join Date
    Dec 2014
    Location
    Powys, Mid Wales
    Posts
    479

    Default

    I am just bumping this thread again, as I don't want anyone to miss out on the evohome trade-in deal over the easter bank holiday weekend here - http://www.automatedhome.co.uk/vbull...e-25-3-gt-28-3

    Many Thanks,

    Richard

  7. #127
    Site Sponsor The EVOHOME Shop's Avatar
    Join Date
    Dec 2014
    Location
    Powys, Mid Wales
    Posts
    479

    Default

    This offer will close at midnight tomorrow night! Any more takers? - http://www.automatedhome.co.uk/vbull...e-25-3-gt-28-3

  8. #128
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,002

    Default

    Quote Originally Posted by Rameses View Post
    Dear All

    A new firmware will be released over the coming weeks for evohome Wi-Fi. V2.1. This will be pushed out sometime soon, but has already been applied to units out of manufacturing.

    - HR92 manual adjustments - Will now be shown on the main evohome and App display
    I use the HR80. Will the manual adjustment on that also be displayed on the main evohome or is this functionality just for the newer HR92. My old MK2 evohome is able to show me manual adjustments made on my Y87RF, but not my HR80.

  9. #129
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,002

    Default

    Quote Originally Posted by bruce_miranda View Post
    I use the HR80. Will the manual adjustment on that also be displayed on the main evohome or is this functionality just for the newer HR92. My old MK2 evohome is able to show me manual adjustments made on my Y87RF, but not my HR80.
    How do I check the software version on the Wifi control panel?

    My HR80 with software 2.03 displays any manual override on the new Wifi Evohome controller. Strangely though I have one HR80 with software 2.04 which doesn't show any change. However I don't trust that HR80 with the 2.04 software, I don't seem to be able to pair the actuator with either the non-wifi or the wifi control panel.

  10. #130
    Automated Home Guru
    Join Date
    Oct 2016
    Location
    Bath, UK
    Posts
    151

    Default

    To find out your current devices 'Application Software Version' and 'WiFi Software Version' to see if you have new firmware installed, press the 'SETTINGS' button once to enter the user settings menu, then press and hold the 'DEVICE SETTINGS' button for approximately 10-15 seconds.

    My versions are (purchased Oct'16):

    Application Software Version: 01.00.03.00

    WiFi Software Version: 01.00.02.00

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •