In some of our rooms we have chosen not to have lights controlled automatic. So the setting is "Manual control only". In those rooms I have tried using the "on delayed unoccupied trigger" to ensure the lights does not stay on after the room is unoccupied.
It turns out however that the lights tend to go off quite randomly as it appeared and after some investigation i found that it was "Room NN cleared by house object" that caused the lights to be turned off even though it was still occupied. I´ve been trying to figure out how I could prevent this "house object" from clearing the room, but I don´t seem to be able to find that setting.
Any ideas where I can find it or should I solve this quite differently?
Kind Regards
Glenn
It turns out however that the lights tend to go off quite randomly as it appeared and after some investigation i found that it was "Room NN cleared by house object" that caused the lights to be turned off even though it was still occupied. I´ve been trying to figure out how I could prevent this "house object" from clearing the room, but I don´t seem to be able to find that setting.
Any ideas where I can find it or should I solve this quite differently?
Kind Regards
Glenn
Comment