I have an Evohome install with all rads fitted with HR92s (9 in total). The boiler is a Potterton Ideal 50 as a sealed system with Megaflo for HW and all radiators on the same run of pipework.
We are planning a kitchen renovation and one option I'd like to explore is to replace the existing rad with a wet UFH solution. From reading, it seem important (due to the flow temperature requirements) that the UFH and rads can be independently controlled.
My simple question is would adding a wet UFH system to my exiting rad pipework in place of the kitchen rad, with a HCC80R work (assuming that all the other rads remain controlled by HR92s so that the UFH would be able to call for heat independently of the rads when required)
Apologies for the naive question but my Honeywell installer is proving difficult to get hold of at the moment
We are planning a kitchen renovation and one option I'd like to explore is to replace the existing rad with a wet UFH solution. From reading, it seem important (due to the flow temperature requirements) that the UFH and rads can be independently controlled.
My simple question is would adding a wet UFH system to my exiting rad pipework in place of the kitchen rad, with a HCC80R work (assuming that all the other rads remain controlled by HR92s so that the UFH would be able to call for heat independently of the rads when required)
Apologies for the naive question but my Honeywell installer is proving difficult to get hold of at the moment
Comment