Have had evohome set up for a week or so now. It's failing to reach my desired temperature in some zones.
Please could you give me some pointers on what to check.
Example
Living room is supposed to be 19C between 6-7am
This morning it was 18C at 5.45am, radiator cold, and didn't warm up anytime before 7am. Boiler was firing as other (non HR92 rads) were hot.
Why am I not reaching my desired settings?
Why was the living room radiator not hot when it was below target.
I have optimum start and stop enabled (with regards to the latter, i assume it wouldnt 'stop' until the target temperature had been reached)
The photos below show the status of the living room, together with the desired set points, at 5.45am - 15 mins before temperature is meant to be 18.
IMG_3567.jpgIMG_3568.jpgIMG_3569.jpg
Thank you
Please could you give me some pointers on what to check.
Example
Living room is supposed to be 19C between 6-7am
This morning it was 18C at 5.45am, radiator cold, and didn't warm up anytime before 7am. Boiler was firing as other (non HR92 rads) were hot.
Why am I not reaching my desired settings?
Why was the living room radiator not hot when it was below target.
I have optimum start and stop enabled (with regards to the latter, i assume it wouldnt 'stop' until the target temperature had been reached)
The photos below show the status of the living room, together with the desired set points, at 5.45am - 15 mins before temperature is meant to be 18.
IMG_3567.jpgIMG_3568.jpgIMG_3569.jpg
Thank you
Comment