Results 1 to 5 of 5

Thread: Hardware Rest Evotouch Controller?

  1. #1
    Automated Home Jr Member
    Join Date
    Feb 2016
    Location
    Bridgend, Wales, UK
    Posts
    22

    Default Hardware Rest Evotouch Controller?

    Quick question:

    Is there a way to hard reset the Evotouch controller?

    Cheers

    John

  2. #2
    Automated Home Jr Member
    Join Date
    Aug 2015
    Posts
    23

    Default

    Quote Originally Posted by datasafe View Post
    Quick question:

    Is there a way to hard reset the Evotouch controller?

    Cheers

    John
    Hi,
    Only reset that I know of is to remove the Evotouch controller from the charging dock. Remove the two batteries for a few minutes. Replace the batteries and wait for the device to restart. Not aware of any button to hold in with a sharp object to reset the unit as on devices such as routers etc.

  3. #3
    Automated Home Jr Member
    Join Date
    Nov 2015
    Posts
    17

    Default

    Quote Originally Posted by Jom View Post
    Hi,
    Only reset that I know of is to remove the Evotouch controller from the charging dock. Remove the two batteries for a few minutes. Replace the batteries and wait for the device to restart. Not aware of any button to hold in with a sharp object to reset the unit as on devices such as routers etc.
    This only semi resets the controller as language, time and Wi-Fi settings remain unchanged.

  4. #4
    Automated Home Jr Member
    Join Date
    Feb 2016
    Location
    Bridgend, Wales, UK
    Posts
    22

    Default

    Quote Originally Posted by theasman View Post
    This only semi resets the controller as language, time and Wi-Fi settings remain unchanged.
    That is true. I removed the batteries and left overnight. This morning I replaced the batteries and was invited to run the configuration/installation wizard.
    Had to bind to the BRD boiler relay
    Set the time - was showing the time I removed the batteries
    Set the date - was showing the date when the batteries were removed.
    Zone settings needed to be reset.
    Controller backlight etc needed to be reset.

    Most importantly - still no WiFi found even though I checked all the suggestions -
    Controller on charging dock
    Power connector fitted securely
    Moved next to wireless router.

    WiFi software version still shows 00.00.00.00

    Think I've exhausted all ideas.

    Thank you to all who've provided information and suggestions, really appreciate you taking the time.

    Regards

    John

  5. #5
    Automated Home Legend paulockenden's Avatar
    Join Date
    Apr 2015
    Location
    South Coast
    Posts
    1,701

    Default

    Quote Originally Posted by datasafe View Post
    WiFi software version still shows 00.00.00.00
    That suggests to me that it's buggered!

    P.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •