Originally posted by Chestnut 2000
View Post
new version of TCC app out today
Collapse
X
-
Just to add my sentiment, I am also pretty disappointed in the new APP. After a few days of using it, I find myself frustrated in using it. The swipe the screen to set the temperature is just arbitrary. Half the time the temp appears under the thumb I am using to set the temp & just very fiddly when I want a set an exact temp & not just something near-ish said temp.
Seems like an awful lot of change for the sake of change.
Is there a way to downgrade to the old app?
Comment
-
-
Originally posted by Andehh View PostJust to add my sentiment, I am also pretty disappointed in the new APP. After a few days of using it, I find myself frustrated in using it. The swipe the screen to set the temperature is just arbitrary. Half the time the temp appears under the thumb I am using to set the temp & just very fiddly when I want a set an exact temp & not just something near-ish said temp.
Seems like an awful lot of change for the sake of change.
Is there a way to downgrade to the old app?
Comment
-
-
Originally posted by Andehh View PostJust to add my sentiment, I am also pretty disappointed in the new APP. After a few days of using it, I find myself frustrated in using it. The swipe the screen to set the temperature is just arbitrary. Half the time the temp appears under the thumb I am using to set the temp & just very fiddly when I want a set an exact temp & not just something near-ish said temp.
Seems like an awful lot of change for the sake of change.
Is there a way to downgrade to the old app?
Comment
-
-
Originally posted by G4RHL View PostI find I don't have to swipe the screen, just touch it at the top and temperature setting goes up, touch at the bottom and it goes down.
Comment
-
-
Originally posted by Mavis View PostOh, I hadn't realised that you could do this - yes I agree it is easier to do this - tap for each increment of 0.5c. I had been randomly touched the screen and tried to drag the temp.
Comment
-
-
Has anyone noticed that the manual override times in the new iPhone app are now displayed an hour out ?
For example if I set an override for a zone to end at 10pm via the controller, the phone app reports it as 21:00.
If I go to modify the override time via the phone app the time wheel will report an initial time of 9pm - if I then set it to say 10:30pm it will in fact set the time to 10:30pm (as reported by the controller) but the main screen of the phone app will report it as 21:30...
Quite why the phone app has a mixture of 12 and 24 hour time in the same interface (even the old version of the app) has always puzzled me.
Another issue I have noticed recently is overrides made via the phone are sometimes partially ignored. For example I might set 16 degrees until 10am, yet when I check a few minutes later the app reports the correct override time, but the temperature is the un-overriden temperature from the schedule instead of the override temp I chose. The override time was honoured, but the override temperature was ignored.
I've been noticing quite a few anomalies like this recently where what is reported by the phone app and what the controller reports are not fully synchronised and some attempted changes from the phone app are ignored.
Comment
-
-
The one hour offset seems to have resolved itself today - it seems almost as if there is an out by one day error in the handling of daylight savings in the app...
The problem with some changes requested via the iPhone app not being applied remain though. In the past I have always received an email reporting "Failed zone change" when this happened but recently I've noticed that some changes are reported by the app as taking effect, yet when I check a few minutes later the change has been ignored/reverted and there is no failed zone change email...most frustrating.
Comment
-
-
Originally posted by DBMandrake View PostThe one hour offset seems to have resolved itself today - it seems almost as if there is an out by one day error in the handling of daylight savings in the app...
The problem with some changes requested via the iPhone app not being applied remain though. In the past I have always received an email reporting "Failed zone change" when this happened but recently I've noticed that some changes are reported by the app as taking effect, yet when I check a few minutes later the change has been ignored/reverted and there is no failed zone change email...most frustrating.
Comment
-
-
Originally posted by Jom View Post...This is disappointing, as it makes the Evohome system somewhat unreliable.....Hopefully, after the holidays Honeywell personnel on these forums will look into these issues and get them sorted.
Comment
-
-
Originally posted by Andehh View PostI'm still really not liking the swipe to set the temp idea, I have set Temps I stick to and swiping I'd just too twiddly to achieve my desired specific temp.
How can i role the app back? Is there a way?
Comment
-
Comment