Advice on PIR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • rockhoppers1964
    Automated Home Lurker
    • Feb 2008
    • 5

    Advice on PIR

    I am running a mainly LightwaveRF system till now as I liked their sockets and wall switches.
    On and off times are controlled by PC based software I have written, it also shows images etc from cameras and weather data on one wall mounted touch screen.
    I have 5 IP cameras set up on which images are captured when the PIR is tripped and notified to PC using an Arduino (again a home made script) broadcasting on UDP.

    Is there a 433 Mhz PIR that will do a UDP broadcast that I can read using the LightwaveRF box, i.e. bypassing the Ardunio ?
    Would like one that also broadcasts a warning when the battery is low.
    An Internal and External version is required.

    I see a lot out there but not sure how they work as a standalone PIR (i.e. without their master alarm system).

    Thanks for help.

    Andrew
  • Vangelis
    Automated Home Guru
    • Sep 2009
    • 131

    #2
    This help?? http://lightwaverf.com/wp-content/up...5/10/LW107.pdf (battery low is visual on the unit however)

    Vangelis

    Comment

    • rockhoppers1964
      Automated Home Lurker
      • Feb 2008
      • 5

      #3
      Help with PIR

      Originally posted by Vangelis View Post
      This help?? http://lightwaverf.com/wp-content/up...5/10/LW107.pdf (battery low is visual on the unit however)

      Vangelis
      Not sure it does, as far as I can tell it only broadcasts to a socket of relay to which it is paired.

      Have asked LightwaveRf to clarify but they are painfully slow to respond !

      Anyone else have any ideas, some of the other homeauto stuff out there must do this ?

      Andrew

      Comment

      Working...
      X