Evening all, I've been graphing my new evohome install for a few days now since it was installed and have noticed something a little off with one zone. The house is unoccupied at the moment, so all zones are set to 15degC. With the exception of obvious solar heating as the sun moves around the house during the day I can see that all zones but one are sticking close to the setpoint. The odd one out, however, is rising up to 18degC and cooling back down again on what seems like a 3hr cycle. I've included a screenshot of the graph below:
3hr_periodocity.jpg
I'm going to move the HR92 to another room and see if the problem follows it tomorrow but thought I'd ask on here first in case anyone has seen a similar issue before. FYI the system does not currently have any optimisation enabled.
3hr_periodocity.jpg
I'm going to move the HR92 to another room and see if the problem follows it tomorrow but thought I'd ask on here first in case anyone has seen a similar issue before. FYI the system does not currently have any optimisation enabled.
Comment