Complete Idratek hardware setup for sale

[ludditeal]

Hi,

Unfortunately due to personal circumstances I need to sell my complete Idratek installation which consists of over 60 different modules which have been amassed over the past few years. Some of them have only been installed for a few months (and some didn't even make it!) Ideally I would like to sell it as a job lot as opposed trying to pack/post individual items so would be ideal for someone who is starting from scratch and wants to do a whole house. Collection is preferred or I may be able to deliver depending on where you are as I am traveling the country a bit at the moment but I will ship at cost if required but the crate everything is in is very heavy - 21Kg+

There are also a couple of Hager VB54R DIN rail enclosures which have been used so have some holes in the back board. Also comes with a load of the Idratek plugs, some distribution boards and some housings. I also have an external LTH somewhere which will be included if I can find it.

Couldn't attach a PDF file to the post as it is size limited but PM me if you want it e-mailed or the Excel but below is a list of all the modules and the current list price from Idratek as a guide to what it would cost purchasing them new. I am not expecting to get near that so make me an offer.


Module Quantity List Price Total Price Comments
24V RAD 1 23V Supply to drive AXT111 Valves via Relay unit
4 WAY POWER 1 Starter Set power dist board
AXT111 VALVE 5 Electronic motor to drive TRV Valves
DRB001 1 £55.00 £55.00 2 Relay 2 button (Gen 1)
DFPH02 8 £273.00 £2,184.00 Multi Function Display panels
DRB002 5 £55.00 £275.00 2 Relay 2 button
DRH002 4 £55.00 £220.00 2 13A relay
IPS 002 1 £297.00 £297.00 Steel boxed Power supply with backup battery and key
ITR001 1 £56.00 £56.00 IR Send/Receive
ITR002 1 £56.00 £56.00 IR Send/Receive
PCA001 2 £62.00 £124.00 Serial Idratek interface. Only 1 Cable (unless I find other)
PCU001 1 £67.00 £67.00 USB Idratek Interface - May have a second
PTH001 2 £63.00 £126.00 "PIR, Temp & Humidity (no longer available from Idratek)"
PTS001 3 £63.00 £189.00 PIR & Temp
QAI002 2 £45.00 £90.00 4 Analogue Inputs
QAO002 1 £48.00 £48.00 As above but brand new
QBI002 2 £45.00 £90.00 4 Button & LED
QLD001 9 £117.00 £1,053.00 4 channel Dimmer. 1 Unit has 1 broken channel.
QLD001 1 £117.00 £117.00 As above but brand new
QRH001 4 £88.00 £352.00 4 x 16A relay
QRI002 2 £82.00 £164.00 4 x 4A relay
QTI001 5 £69.00 £345.00 4 x 1A Relay for LED/CFL switching
REMOTES 3 3 IR remotes for use with DFP/IR units Brand new
SLD002 1 £57.00 £57.00 Single 250W dimmer
SLD002W 3 £57.00 £171.00 As above but brand new
SRH002 1 £55.00 £55.00 1 x 10A relay
XRM002 5 £11.00 £55.00 Relays for use with DFP panels (and others) 3 brand new.
Grand Total £6,246.00

Thanks
Allan

[ludditeal]

No Offers

Guess the only other option then is to package it out on the dreaded E-Bay. I am working away at the moment but once I am back in a month or two I will start posting up auctions with various items in. Still open to offers in the meantime.
Cheers
Allan

[Mike Ginns]

No Offers

Guess the only other option then is to package it out on the dreaded E-Bay. I am working away at the moment but once I am back in a month or two I will start posting up auctions with various items in. Still open to offers in the meantime.
Cheers
Allan

Hi

I could be interested. Can you give me a contact email address and which city you are based in and We can discuss.

Thanks

Mike

[Mike Ginns]

Hi,

Have you returned yet. Contact me. Always in the he market for more Idratek.

Mike

[ludditeal]

Sorry Mike,

For some reason I have had no notification that anyone had posted a response. Will send you a PM with details. I only looked today as I was about to start listing the stuff on E-bay. Will drop you my details in a PM.

[ludditeal]

OK, apologies to all those who sent me a PM. For some reason I had no prompt or notification that I had any messages. Have been into my account settings and enabled all the notifications so hopefully won't miss them next time.

I would still prefer to sell as a job lot so will give some time to come to an agreement with those who have expressed and interest in the complete set before deciding to split it out, in which case I will contact the people who have expressed an interest in parts directly.

Sorry for ignoring everyone. It wasn't intentional!

Cheers
Allan

[ludditeal]

Further to the post from the other day I am splitting my installation although a large chunk of items has already gone.
Below is a list of what remains and an asking price.
Unless indicated these units have all been used. They have all been powered up in the last couple of days and the memory factory reset (FF overwrite for addresses 00 to 1FF). The faceplate items are all unmarked and show no signs of wear (Idratek Quality ). Some of the relays have labels and/or small writing on them but nothing too un-intrusive. If you have any particular concerns about presentation I can take a photo. Some of the insulation shields on the back of the single gang units have small cutouts where cable came in from a different location.
1 x 24 DIN Rail mounted Power Supply – used to drive radiator valves via Relay – Used but working fine. Supplies up to 2.5A. £20 (Cost £50)
5 x Sauter AXT111 Radiator Valve Heads – Fit a standard Honeywell radiator head. 24v Wax head. £20 (Cost £40)
8 x DFPH02 Multi function display panels – Some of these were only installed for a couple of months ago. £180 (New cost £273)
1 x DRB001 2 Relay 2 Button – This is a first-generation item with grey surround £25
5 x DRB002 2 Relay 2 Button – Second generation items £30
4 x DRH002 2x13A Relay - £30
2 x PCA001 Serial Idratek interface - One V1(Grey surround) one V2, one Only 1 Cable (unless I find other) £15 incl cable, £10 ex
1 x PCU001 USB Idratek Interface -£35 Will only sell once everything has gone in case of any queries/issues.
2 x QAI002 4 Analogue Inputs - £25
1 x QAI002 4 Analogue Inputs – Brand new £28
2 x QBI002 4 Button & LED £25
3 x QRH001 4 x 16A relay - DIN Rail mounted £45
1 x QRH001 4 x 16A relay – Din rail mounted. Faulty. Only output 1 works £10 (Enabling output 2/3 or 4 causes device to reset. May be an easy fix? Stuck relays?)
2 x QRI002 4 x 4A relay DIN Rail mounted £45
1 x QRI002 4 x 4A relay – Mounted in Plastic Crabtree 5 gang CU - £45
1 x SLD002 -Single 250W dimmer - £25.00
3 x SLD002 - As above but brand new £28.00
1 x SRH002 1 x 10A relay £28.00
5 x XRM002 - Relays for use with DFP panels (and others) 3 brand new. £8.00
At the end I will also have an odds and sods goody bag such as fuses, connecters etc. Once they are all sorted will give a list of what there is.

Postage will be at cost or collection is welcome from Leicestershire (although I am working down Woking way on Wednesdays if that works for some people).

Send me a PM if you are interested in anything.

Cheers
Allan

[ludditeal]

Everything has now gone. Thanks to all those who expressed an interest and sorry to those who were disappointed.

Allan