Results 1 to 3 of 3

Thread: Display macro text in DFP

  1. #1
    Automated Home Guru Nad's Avatar
    Join Date
    Jul 2008
    Posts
    144

    Default Display macro text in DFP

    Hi all,

    I've written a macro to do a power cycle on one of the QRH channels and I was wondering if anyone has any ideas on how to get a DFP to display the action message as text ranter than speak out via the speaker?

    e.g.

    1 - Speak message - "Enter password to do that thing"
    2 - Trigger object - Password verification
    3 - Wait for event - Password state output
    4 - If - Password state output - True
    5 - Speak message - "The thing is about to start"
    6 - blah blah blah

    So I'm trying to get the text on the DFP to clear and output the speak message lines as text.

    Thanks,
    Nad

  2. #2
    Automated Home Ninja Viv's Avatar
    Join Date
    Dec 2004
    Posts
    284

    Default

    [QUOTE=Nad;27996]

    5 - Speak message - "The thing is about to start"

    In All Display object create a Text Message e.g. Item 1 > "The thing is about to start"

    In Macro, replace item 5 above and trigger All Display object local item 1 and Annunciate to the required DFP display.

    Viv

  3. #3
    Automated Home Guru Nad's Avatar
    Join Date
    Jul 2008
    Posts
    144

    Default

    Excellent! Thanks Viv

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •