Results 1 to 10 of 10

Thread: New unvented cylinder - nowhere for Evohome Probe :(

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Guru
    Join Date
    Jan 2015
    Posts
    103

    Default New unvented cylinder - nowhere for Evohome Probe :(

    Hi all,

    My parents have been using Evohome for over a year now, with great success. But now they are having their hot water system converted from gravity feed to mains pressure. The unvented cylinder is a Warmflow IN250UV (250L unvented indirect), here is a schematic of the tank:

    Warmflow.jpg

    I have both the strap on sensor and the insertion sensor, but there are no available wells. Where could we attach the temp sensor?

    The plumber doing the install has never used Evohome, but he seems to think that as the secondary return isn't being used, instead of blanking it off he can get a 22mm "probe pocket" that would allow the probe to be inserted there, something like this:

    http://www.sensorshop.co.uk/Pocket-6...h=thermopocket

    150mm2-500x500.jpg

    Does that sound feasible? More to the point, would it be safe?

    Thanks in advance!

    Gareth
    Last edited by garmcqui; 26th October 2016 at 09:45 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •