Hi,
I've just purchased evohome and am getting my head round the wiring required. At the moment I have a combi boiler driving to heating zones, where zone-1 is for UFH in the kitchen and zone-2 is the radiators in the rest of the house. This is in a S-Plan configuration with 2x2-port valves isolating each zone.
I've attached the existing wiring diagram, and a diagram which shows the new setup with evohome. The 2-port valve for the radiators will be disconnected from power and permanently latched open, leaving just the 2-port valve for the UFH.
Does the wiring diagram look correct. It seems simple enough, just want to make sure that I'm not missing anything?
Thanks,
Don
Existing wiring Existing Wiring.jpg
Evohome wiring new-evohome.jpg
I've just purchased evohome and am getting my head round the wiring required. At the moment I have a combi boiler driving to heating zones, where zone-1 is for UFH in the kitchen and zone-2 is the radiators in the rest of the house. This is in a S-Plan configuration with 2x2-port valves isolating each zone.
I've attached the existing wiring diagram, and a diagram which shows the new setup with evohome. The 2-port valve for the radiators will be disconnected from power and permanently latched open, leaving just the 2-port valve for the UFH.
Does the wiring diagram look correct. It seems simple enough, just want to make sure that I'm not missing anything?
Thanks,
Don
Existing wiring Existing Wiring.jpg
Evohome wiring new-evohome.jpg
Comment