Results 1 to 3 of 3

Thread: Low level wash lighting for Bathroom

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Jr Member
    Join Date
    Oct 2004

    Default Low level wash lighting for Bathroom

    Has anybody installed low level wash lighting in a bathroom? I'm interested in what products you used. I'm fed up with being rudely awaken due to brightness if I need to use the bathroom in the middle of the night. So I saw some eyelid LEDs in a posh bathroom shop but they were 200 for the lights and 90 for the PIR because "it was special" and that's about all I could get from them.

    I've been trawling the internet most of morning for something neat and this is as good as I've got so far...

    Sensio Nimbus 6 Pack - 33
    Sensio PIR Sensor - 28

    These together seem to make up a solution but, the one's I saw had an eyelid which means all the light went down to the floor. I found one that looked the part - (ILS EYELID1W) but the LEDs were 94 each! Also another on mr-resistor that I like and at a more 'reasonable' 39 each. Both had to have driver and PIR extra.

    If anyone has come up with a good solution with nice looking lights I'd really appreciate some idea of what you ended up with.

    Last edited by redw0001; 8th January 2017 at 03:43 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts