Override

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • JohnOF
    Automated Home Lurker
    • Feb 2017
    • 1

    Override

    New user, first post!
    I have Honeywell Evohome controller connected to 13 HR92 valves/radiators in 11 zones; the setup can heat the hot water without central heating.
    So far, the system is great, if I ignore the bedroom valves opening in the morning making the alarm clock redundant!
    One zone has developed a recurring override in the morning which effectively leaves that radiator on all day. Cancelling this temporary override on the Controller and/or the mobile app does not remove it. I don't know how it got there, but it won't go.
    Any suggestions?
  • HenGus
    Automated Home Legend
    • May 2014
    • 1001

    #2
    Not heard of this one before. I would delete the zone from the controller; hard reset the HR92 and re-build the zone as a starter for 10.

    I should have added that re-setting the HR92 (parameter 12) does not clear the binding. To clear the binding, you need to do the following:

    Clearing binding at the HR92

    1. Press the button briefly.
    2. Hold the button pressed for 5 seconds.
    3. Select bind using the adjustment dial and keep the
    button pressed until cleared is displayed. Binding is deactivated.
    Last edited by HenGus; 21 February 2017, 03:39 PM.

    Comment

    Working...
    X