Controller Showing Honeywell Logo And Now HourGlass For Zone Temperatures

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • IM35461
    Automated Home Sr Member
    • Jan 2012
    • 69

    Controller Showing Honeywell Logo And Now HourGlass For Zone Temperatures

    Tonight using the Android App I thought I'd set one of the room temperatures to 1c lower.

    Anyway, a little later I noted the WiFi built in controller showing the word "Honeywell" in red filling the display so I thought either an update or perhaps a crash and reboot.

    Seeing as four of the zones no longer display the temperature's from the HR92 I guess it crashed.

    Just noted one of the hourglasses has changed to room temperature so I guess I just have to wait a bit longer.

    Is this a common thing or perhaps caused by the new Android app?

    2017-04-12 20.52.28.jpg
  • StephenC
    Automated Home Guru
    • Feb 2017
    • 102

    #2
    Looks like a firmware update has taken place judging by other posts today where others are getting a new firmware. Nothing to worry about.

    You can speed up the "check in" of the HR92's by pressing the button on each of them. This will report back the current temp and remove the hour glass.

    Comment

    • IM35461
      Automated Home Sr Member
      • Jan 2012
      • 69

      #3
      I must admit to not making note of the firmware version but it has this loaded

      App 01.00.07.01
      WiFi Version 01.00.06.10

      So As suggested it must have been an update as mentioned in http://www.wordpress-1219309-4387497...oing-to-happen
      Last edited by IM35461; 12 April 2017, 09:22 PM.

      Comment

      • G4RHL
        Automated Home Legend
        • Jan 2015
        • 1580

        #4
        I'm on

        Application Software 01.00.02.01
        Wifi Software 01.00.02.00

        So does this mean I have exciting things to look forward to?!

        Comment

        Working...
        X