Controller Showing Honeywell Logo And Now HourGlass For Zone Temperatures

[IM35461]

Tonight using the Android App I thought I'd set one of the room temperatures to 1c lower.

Anyway, a little later I noted the WiFi built in controller showing the word "Honeywell" in red filling the display so I thought either an update or perhaps a crash and reboot.

Seeing as four of the zones no longer display the temperature's from the HR92 I guess it crashed.

Just noted one of the hourglasses has changed to room temperature so I guess I just have to wait a bit longer.

Is this a common thing or perhaps caused by the new Android app?

2017-04-12 20.52.28.jpg

[StephenC]

Looks like a firmware update has taken place judging by other posts today where others are getting a new firmware. Nothing to worry about.

You can speed up the "check in" of the HR92's by pressing the button on each of them. This will report back the current temp and remove the hour glass.

[IM35461]

I must admit to not making note of the firmware version but it has this loaded

App 01.00.07.01
WiFi Version 01.00.06.10

So As suggested it must have been an update as mentioned in http://www.automatedhome.co.uk/vbull...oing-to-happen

[G4RHL]

I'm on

Application Software 01.00.02.01
Wifi Software 01.00.02.00

So does this mean I have exciting things to look forward to?!