Evohome - please help!

[Rameses]

is two way comms needed in this instance?

p.s. I see there's still loads of stock in the marketplace.

It is if you want interaction with local sensor/control and that the device can proactively inform it's off under interrogation.

Ref stock - spares & maintenance holding. Not proactively made anymore.

[roydonaldson]

Would you by any chance have a time frame for that 'currently' option ? Nothing too specific needed. I have no UFH in my conservatory and had put off as there was no central way to control this. Now, if I can add it on to my EvoHome then I'd look to do this. But, wonder if I should do it late summer, or more into the autumn ?

[bruce_miranda]

If a BDR91 is used to trigger a resistive load then is TOO still used? I guess it probably is because the BDR91 has no way of knowing what it is switching.

[DBMandrake]

If a BDR91 is used to trigger a resistive load then is TOO still used? I guess it probably is because the BDR91 has no way of knowing what it is switching.

"TOO" ?

If you mean TPI, then yes it would still do TPI with a resistive load. It doesn't know what it is switching.

[bruce_miranda]

Bl**dy autocorrect. Yes I meant TPI.

[Rameses]

If a BDR91 is used to trigger a resistive load then is TOO still used? I guess it probably is because the BDR91 has no way of knowing what it is switching.

BDR doesn't do the TPI, the evo & room sensor deliver that.