Results 1 to 10 of 11

Thread: Bug in the current version of the Honey Total Connect Comfort App?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Jr Member
    Join Date
    Oct 2016
    Location
    Cambridge
    Posts
    22

    Default Bug in the current version of the Honey Total Connect Comfort App?

    Is there a bug in the current version of the Honey Total Connect Comfort (TCC) App?

    If I manually change a zone temperature, then later cancel that change, the zone does not revert back to the scheduled temperature setting.

    E.g. The current Living Room temperature is 20.5C (schedule is 20C). I then increase the temperature (i.e. override the scheduled temperature) to 21C for a few hours:
    Screenshot_A.jpg
    Screenshot shows the current temperature of 20.5C (at 21:11) with a target temperature of 21C until 23:30.

    If I now cancel the manual temperature setting, the zone should revert back to the schedule, but it does not. Instead, the app displays the 21C as the set point – as if this is the temperature in the schedule (see image below).
    Screenshot_B.jpg

    The schedule is shown below:
    Screenshot_C.jpg

    I didnt experience this issue in previous versions of the TCC app.
    Last edited by Karrimor; 31st October 2017 at 01:04 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •