Reply With QuoteAre you using at as just a Smart thermostat or do you also have the HR92s (Radiator controllers) and want to use it as a temperature sensor for the HR92 in the hall?
Evohome controller as room thermostat
Hello, I have recently installed an Evohome system. The Evohome website says that “The evohome controller can act as a room thermostat on its own.” I would like to do this for the Hall zone where the controller is wall mounted, but can’t find any guidance on how to set it up this way. Can anybody help me with how to do this please?
Are you using at as just a Smart thermostat or do you also have the HR92s (Radiator controllers) and want to use it as a temperature sensor for the HR92 in the hall?
I have HR92s in all the other rooms, but no TRV at all in the Hall. Not sure if I can use the controller instead of an HR92 for the radiator in the Hall?
How is the hall radiator going to be controlled if it doesn't have an HR92 attached?
P.
The EvoHome controller would need something to control - in your case a HR92 on the hall rad. It can't control something that isn't there.Originally Posted by Wilch100
Yes it can not control something. I have it set that way in my Hall. I have my controller assigned to one zone (Hall) but no HR80 associated with that zone. I keep the set point of that zone at 5C all the time. So basically its just a fancy wall mounted thermometer for the Hall.
Thank you - do you know what the zone settings should be to do this please?
Mine is set as a Radiator Valve, with the controller being the temperature sensor and no actuator paired.
I will give that a try - many thanks
We have been here before. I believe that the Evotouch can be used just as a thermostat/heating timer; ie, with no TRVs or just standard TRV heads. In such a situation, the house would just be a single zone.
