Long Press the Settings icon and show us what the System Summary page looks like on your controller.
Long Press the Settings icon and show us what the System Summary page looks like on your controller.
Could you make a new thread for this UFH controller issue. In a few years no one will find it here.
Good call. Continuing here: https://www.automatedhome.co.uk/vbul...1626#post41626
@DanD - I answered on the new thread but in short, yes, the System Summary shows the UFH demands
Not sure what else to suggest without further investigation. Maybe as @Dan says, the HCE80 is just not sending the individual zone data. Have a look at the "raw" data in the separate log file and see if that gives you anything.
@smar could you help us develop our understanding about the UFH controller messages. Between a few of us we have practically every bit of Evohome kit EXCEPT an UFH controller. Would you either jump on to the other thread that is discussing this. I just need some logs of raw messages from your system especially if they contain a 02: device.
Sure. Do you mean the "evohome HCE80 UFH valve state decoding from radio signals" thread?