Originally posted by DBMandrake
View Post
New evohome FW - update WiFi 02.00.17.00 and Application 02.00.17.03
Collapse
X
-
Just updated to this version and now have a ghost zone on my app (never had it before) any tips how to get rid. I thought this software was supposed to finally fix it
IMG_3540.jpg
IMG_3541.jpgLast edited by Scointer; 5 February 2018, 10:01 PM.
Comment
-
-
So I can't work out if it is this new firmware that is causing me major headaches or the new Wi-Fi controller :-(
After running with the old gateway controller for a few years with no issues I decided to upgrade to the new WiFi controller (mainly for the new items in the firmware release) and I have had numerous issues. My latest is with the App/Web. My hot water has just switched on as per schedule and started heating up, the tank icon has gone red on the controller but the web and app are still showing as off. The water temp is going up on everything but the app/web is still showing as off even though we are now 25 minutes into the on schedule. The schedule shows correct on the app and the temp is updating and rising but the bottom is still blue and stating off. I have never had this issue before can anyone shed any light on this please...
As a side issue that I haven't even started to look into yet all the HR92's on my downstairs rads (3 of them) have all gone to open window mode even though the temp has not dropped. I am yet to investigate why this has suddenly started happening when it has never happened before despite them being fitted a few years ago :-(Last edited by Scointer; 7 February 2018, 01:29 PM.
Comment
-
-
You're not the only one having problems with hot water on/off status being reported incorrectly on the phone app - I reported this a week or two ago in another thread and a few people confirmed the issue.
I think it's just unlucky timing for you and Honeywell are having some problems with their Web API...
Regarding the open window mode - something to keep in mind is that you can disable open window mode either from individual HR92's, or in the zone configuration on the controller. Are you sure you didn't have window detection disabled on your old controller but forgot about this when you set up the new controller ?
Comment
-
-
Originally posted by Scointer View PostSo I can't work out if it is this new firmware that is causing me major headaches or the new Wi-Fi controller :-(
After running with the old gateway controller for a few years with no issues I decided to upgrade to the new WiFi controller (mainly for the new items in the firmware release) and I have had numerous issues. My latest is with the App/Web. My hot water has just switched on as per schedule and started heating up, the tank icon has gone red on the controller but the web and app are still showing as off. The water temp is going up on everything but the app/web is still showing as off even though we are now 25 minutes into the on schedule. The schedule shows correct on the app and the temp is updating and rising but the bottom is still blue and stating off. I have never had this issue before can anyone shed any light on this please...
As a side issue that I haven't even started to look into yet all the HR92's on my downstairs rads (3 of them) have all gone to open window mode even though the temp has not dropped. I am yet to investigate why this has suddenly started happening when it has never happened before despite them being fitted a few years ago :-(
Comment
-
-
Originally posted by DBMandrake View PostYou're not the only one having problems with hot water on/off status being reported incorrectly on the phone app - I reported this a week or two ago in another thread and a few people confirmed the issue.
I think it's just unlucky timing for you and Honeywell are having some problems with their Web API...
Regarding the open window mode - something to keep in mind is that you can disable open window mode either from individual HR92's, or in the zone configuration on the controller. Are you sure you didn't have window detection disabled on your old controller but forgot about this when you set up the new controller ?
Does the HR92's decide on their own if they should go into open window mode or does the controller use some sort of algorithm to decide and tell the HR92's?
Thanks everyone.Last edited by Scointer; 7 February 2018, 02:11 PM.
Comment
-
-
Originally posted by robj20 View PostI had a zone go into openwindow mode last night even though nothing was open. If it does it again i will be turning the function off.
By default it only takes a temperature drop of 0.6 degrees over (I think) a 4 minute period to trigger it.
The spare room off our hallway I normally keep at 15 degrees, I sometimes find just opening that door and leaving it open a few minutes triggers open window detection on the hallway radiator due to the cold air from the spare room flowing past the hallway radiator...
Comment
-
-
Cold this morning with no heat
The evohome screensaver said it was 05:52 (it is actually after 08:15). Touched the screen and it indicated 07:39 so I turned off auto clock update (which is beyond Honeywell to get working) and set the time. a few minutes later the heating came on.
The heating went off last night at about the normal time.
No failure email from Honeywell so I guess it was still talking and the android app which is working.
Not yet read all the thread to see if this is a common problem.
Edit: does not seem common and had the update since it was first released.Last edited by IM35461; 8 February 2018, 09:30 AM.
Comment
-
-
Originally posted by IM35461 View PostCold this morning with no heat
The evohome screensaver said it was 05:52 (it is actually after 08:15). Touched the screen and it indicated 07:39 so I turned off auto clock update (which is beyond Honeywell to get working) and set the time. a few minutes later the heating came on.
The heating went off last night at about the normal time.
No failure email from Honeywell so I guess it was still talking and the android app still works.
Not yet read all the thread to see if this is a common problem.
Comment
-
-
Originally posted by spectral View PostI had the same problem. Didnt reset the time (am at work now), so it's still not working....
Comment
-
Comment