Results 1 to 5 of 5

Thread: Observations with using the Opentherm Gateway as a monitor and Boiler max

  1. #1
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,025

    Default Observations with using the Opentherm Gateway as a monitor and Boiler max

    I finally plugged in my OTGW device that has been sitting in the box for over a year. My set up is the Evohome OTB is plugged into the VR33 (OT <-> eBUS) on a Vaillant 438 boiler. For the last couple of days, I have the OTB passing through the OTGW before going to the VR33.

    I have the OTGW set up as a Monitor only, which in theory is supposed to pass messages unchanged. However what I have noticed is the simple presence of the OTGW in the chain sets the max boiler flow requested temperature to whatever is set as a default on the OTGW. So I am no longer seeing the 90C heat requests on the boiler.

    I have been lucky that the Vaillant has always allowed me to clip the max temperature based on the knob in the front. But I just thought that might be a solution for anyone wanting to use the Evohome OT Bridge but where the boilers are expecting the "Optional" Max temperature to be set, but the OTB doesn't set it. This causes those boilers to just ramp up as far as near 90C as physically possible.

  2. #2
    Automated Home Sr Member
    Join Date
    Apr 2017
    Posts
    91

    Default

    This function should always have been available with an Evohome/OpenTherm setup.

  3. #3
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,025

    Default

    It's not a mandatory function according to the OT specs.

  4. #4
    Automated Home Sr Member
    Join Date
    Apr 2017
    Posts
    91

    Default

    Quote Originally Posted by bruce_miranda View Post
    It's not a mandatory function according to the OT specs.

    That's true, but I think real life use has shown they made a mistake in their specs.

    As a flagship product there should be enough OpenTherm options available to provide a thorough rather than basic degree of functionality, in my opinion.

  5. #5
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    1,025

    Default

    There is a definite change of behaviour that I have noticed by introducing the OTGW into the chain, EVEN when the OTGW is definitely in Monitor mode. There is one radio message that I have seen simply stop between the Controller and the OT Bridge when the OTGW is added.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •