New evohome FW - update WiFi 02.00.17.00 and Application 02.00.17.03

[Rameses]

The heat demand will then not be available on the main screen showing the zones ? That is a pitty but ok, maybe in a next release as this is very usefull to see which zones are heating !!

Also I read above it could help undestanding the "Phantom demand" ... I escalated this issue more than a year ago via Honeywell Belgium who were then in touch with UK, and they investigate remote on my system as far as I understand ... they provided the explanation on this issue and a workaround (battery insertion procedure)

Third, you talk about the installer menu ? I installed the system myself, and I guess you talk about a long press on the setting key ?

MAny thanks !!

Morpheus - I sent you a reply to your DM

[Rameses]

Can’t wait for the new update, so glad to hear they’ve all been rolled into one. Seems more logical sense.

I agree regarding the demand icon, why can’t you just have a little flame icon on each zone on the main screw when it is calling for heat?

Will the update be out before Christmas? As I’ve got a few projects in mind that I can now do with the Electric UFH zone.

Yes - the elves are working hard. Seriously though - yes - this is the plan - but we are waiting for our live trials to finish - we never want to take risks with people's heating especially this time of year.

[Skeandubh]

Out of interest, what is this % demand? Is it percent open for each HR92? Or something else?

[morpheus]

At least interesting to see like on a standard thermostat if and for what zone the heating system is working

[roydonaldson]

Perhaps good to let customer support know that there is a new release:

"Dear Mr. Donaldson,

I have received the confirmation that there is no V2 firmware.
We have checked in the system and you already have the latest firmware running.

Kind Regards,
Victor

E&ES Europe Consumer Support
Honeywell | Environmental & Energy Solutions Europe
"

[HenGus]

Perhaps good to let customer support know that there is a new release:

"Dear Mr. Donaldson,

I have received the confirmation that there is no V2 firmware.
We have checked in the system and you already have the latest firmware running.

Kind Regards,
Victor

E&ES Europe Consumer Support
Honeywell | Environmental & Energy Solutions Europe
"

It’s a Brexit thing. No agreement on the 3 principles, so no acknowledgement of a firmware update. FWIW, I got a similar response a month or so ago when Rameses first raised the prospect of new firmware.

[Chrisnoy]

Yes, I too received an e mail that said the present firmware is the latest. Very poor communication.

[rvb99]

I’m not sure it’s poor communication or we can blame the front line support . As I understand from the above thread there is, as of yet, no official new version.

[Skeandubh]

In the email I received from Honeywell support they stated that there was a rev 2 but it wasn’t being pushed out yet, which we all know is the case, but obviously not all Honeywell support are aware of this. I think this is the confusion mentioned above.

[JamboV6]

How do I find out which version mine is running, is there anyway to force an update?