Results 1 to 10 of 11

Thread: HR80 & HR92 in same multi room zone?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Lurker
    Join Date
    Sep 2016
    Posts
    4

    Default HR80 & HR92 in same multi room zone?

    I have a gateway model evohome and HR80 radiator controllers, I have just added a radiator with a HR92 and bound it to a zone that already has 2 HR80s in it, I also changed it to a multi room zone at the same time. The problem is that one of the radiators is cold and the other two don't seem to turn off at all - is it OK for me to mix the HR80 and HR92 in the same zone or should I put the HR92 in another single radiator zone and have 3 HR80s in the one zone?

  2. #2
    Automated Home Ninja Dan_Robinson's Avatar
    Join Date
    Jun 2012
    Posts
    347

    Default

    It should work, but when I've retrofitted actuators and whatnot, I've always deleted the zone and started again.

    Don't forget to remove the heads, fully open the valve and refit the heads to allow them to relearn the throw of the valve.
    Kind Regards - Dan Robinson (Jennings Heating Ltd)

  3. #3
    Automated Home Lurker
    Join Date
    Sep 2016
    Posts
    4

    Default

    Thanks, I will try doing that. Does it matter which order I bind the radiator controllers in?

  4. #4
    Automated Home Ninja Dan_Robinson's Avatar
    Join Date
    Jun 2012
    Posts
    347

    Default

    On multi room zones, not so much.
    Kind Regards - Dan Robinson (Jennings Heating Ltd)

  5. #5
    Automated Home Lurker
    Join Date
    Sep 2016
    Posts
    4

    Default

    OK thanks, would it be different if I was binding a HR92 and a HR80 to a single room zone then?

  6. #6
    Automated Home Ninja Dan_Robinson's Avatar
    Join Date
    Jun 2012
    Posts
    347

    Default

    First one bound is the sensor, that's the difference.
    Kind Regards - Dan Robinson (Jennings Heating Ltd)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •