Does anyone know if the Evohome settings for Zones and device bindings etc are backed up anywhere. My query is based on possibility of power failure and then battery failure. Would I then need to get someone out to rebind and set everything up or does the setting for the Evohome get backed up somewhere within Honeywell's Evohome home cloud!.
I ask as many months ago when I removed by Evohome controller from the wall mount the device restarted, when it come back I had to resetup the wifi, and after this all my zones names were changes to wrong names, as I had disable overrides set on all HR92's I had to remove the batteries from each of them before I could get them to be seen again by the Controller.
I have been monitoring the new firmware section and notice that one person had a similar experience to me when the unit updated. Now If this happens when I am away at all my family isn't going to be able to resolve, so am concerned that if my controller reverted to old zone names and setting once when it reset when being removed from the cradle, is there a good chance the same thing may happen if the device receives a firmware update and restarts.
It would be good if there was an option to somehow backup the Evohome settings somewhere remotely, either to a PC, somewhere on Honeywell servers or even to the Evohome Mobile App, Enabling a restore settings, bindings and zone names and schedules to the unit should it accidently loose its settings.
Cheers!
I ask as many months ago when I removed by Evohome controller from the wall mount the device restarted, when it come back I had to resetup the wifi, and after this all my zones names were changes to wrong names, as I had disable overrides set on all HR92's I had to remove the batteries from each of them before I could get them to be seen again by the Controller.
I have been monitoring the new firmware section and notice that one person had a similar experience to me when the unit updated. Now If this happens when I am away at all my family isn't going to be able to resolve, so am concerned that if my controller reverted to old zone names and setting once when it reset when being removed from the cradle, is there a good chance the same thing may happen if the device receives a firmware update and restarts.
It would be good if there was an option to somehow backup the Evohome settings somewhere remotely, either to a PC, somewhere on Honeywell servers or even to the Evohome Mobile App, Enabling a restore settings, bindings and zone names and schedules to the unit should it accidently loose its settings.
Cheers!
Comment