Adressable temp. sensors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • JayS
    Automated Home Lurker
    • Nov 2005
    • 5

    Adressable temp. sensors

    Hi,
    Has anybody had any experience regarding the use of very small footprint temp sensors, for whole house zone temp regulation, that run on a bus system, therefore adressable? Any hints on identifying a workable solution?
    Thanks
    JayS
  • danward79
    Automated Home Sr Member
    • Jul 2004
    • 73

    #2
    Re: Adressable temp. sensors

    I am playing with Dallas Semiconductors 1-wire devices. Such as the DS18S20, etc, etc.

    I beleive they are the cjoice of many
    Cheers

    Dan

    Comment

    • JayS
      Automated Home Lurker
      • Nov 2005
      • 5

      #3
      Re: Adressable temp. sensors

      Thanks, Dan.
      I already knew about that sensor, only haden't found the adequate hardware to interface it with. I now have found from Quasarelectronics.com. Any other sugestions?
      JayS

      Comment

      • danward79
        Automated Home Sr Member
        • Jul 2004
        • 73

        #4
        You could try the temp08, I don't know about that device thou.

        I use a DS9097U and Girder.

        You should have a look at the DS2406 addressable switch, you can also use it for detecting an input, on the same bus.

        have a look at this site. http://www.jon00.me.uk/ some interesting stuff on it about 1-wire. I beleive Jon is a member here, too. So you may get some input from a pro!...
        Cheers

        Dan

        Comment

        • JayS
          Automated Home Lurker
          • Nov 2005
          • 5

          #5
          Re: Adressable temp. sensors

          precious link and info, Dan.

          Thanks ever so much.
          JayS

          Comment

          • FrankMcAlinden
            Automated Home Guru
            • Feb 2004
            • 109

            #6
            Re: Adressable temp. sensors

            Hi
            I also use the Dallas DS18S20 sensors connected to my Probe system...
            Im also able to monitor appliance status with the same hardware....

            Can locate 2 dallas sensors in each of the 8 zones.......



            HTH
            Frank
            Home of FirM - the Multi Zone IR Transport System
            http://www.armaghelectrical.com.au/index.html

            Comment

            • toscal
              Moderator
              • Oct 2005
              • 2061

              #7
              Re: Adressable temp. sensors

              Try here http://www.audon.co.uk/1-wire_weather.html and scroll down about half way, they do serial and USB one wire adaptors.
              IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
              Renovation Spain Blog

              Comment

              Working...
              X