Results 1 to 3 of 3

Thread: HR80 Parameter settings - is there such a thing ?

  1. #1
    Automated Home Lurker
    Join Date
    Jan 2018
    Posts
    2

    Question HR80 Parameter settings - is there such a thing ?

    Hi
    I am relatively new to the Evohome system; whilst getting an Ideal Vogue C40 fitted I got the engineer to fit the WIFI sender to the boiler. I have since installed a mix of HR92's & HR80's to 14 rads and created 9 zones.
    Through this forum I have establish how to change parameters within HR92's and finally get them all to work the way I intended.
    My question is are there similar parameters I can change within the HR80's - ie establishing off position for optimum travel etc. I have found limited docs but nothing that going into installation settings.

    Thanks
    Will
    Last edited by Sammax; 17th January 2018 at 12:06 PM.

  2. #2
    Automated Home Legend
    Join Date
    Jul 2014
    Posts
    996

    Default

    The HR80 has very few parameters. One is Default pin travel (def) and Full pin travel (full). And there is a way to reset the HR80 to factory settings. See https://www.honeywelluk.com/Document...e/pdf/1148.pdf

  3. #3
    Automated Home Lurker
    Join Date
    Jan 2018
    Posts
    2

    Default

    Thanks. As I suspected limited adjustment available. Full travel done.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •