Hi folks,
I added a Y87RF to the master bedroom which has two radiators because it was always below temperature (based on a separate thermometer I have in the room). I assumed that having the Y87RF on the opposite side of the room would even things out nicely, and it made a massive difference. Too massive. The room is now almost 2 degrees above the temperature that the Y87RF sees, and I think the reason is because I mounted it on an outside wall. Using an infrared laser thermometer thingie, I measure 2 full degrees C difference between the external wall and the internal wall it is adjacent to, 20 cms away (the Y87RF is mounted in the corner). So... is there a way of saying "please add 2 degrees to the temperature that this Y87RF thinks it is"? If that's not possible, my two options are:
1) Move the Y87RF (leaving some holes behind) to the inside wall
2) Adjust the whole schedule of the room down by 2 degrees -- very confusing, and even more if my wife needs to fiddle with the Y87RF
Thanks!
I added a Y87RF to the master bedroom which has two radiators because it was always below temperature (based on a separate thermometer I have in the room). I assumed that having the Y87RF on the opposite side of the room would even things out nicely, and it made a massive difference. Too massive. The room is now almost 2 degrees above the temperature that the Y87RF sees, and I think the reason is because I mounted it on an outside wall. Using an infrared laser thermometer thingie, I measure 2 full degrees C difference between the external wall and the internal wall it is adjacent to, 20 cms away (the Y87RF is mounted in the corner). So... is there a way of saying "please add 2 degrees to the temperature that this Y87RF thinks it is"? If that's not possible, my two options are:
1) Move the Y87RF (leaving some holes behind) to the inside wall
2) Adjust the whole schedule of the room down by 2 degrees -- very confusing, and even more if my wife needs to fiddle with the Y87RF
Thanks!
Comment