Well, I had to resort to a full-on, battery-pull reset of the controller this morning in my dressing gown.
I tried the recommended of manually resetting the clock (which at least put my heating on) clicking on and off the automatic Wi-Fi update button several times but no avail. The clock just solidly remained at the time I manually set it to. I waited an hour but with no change.
I've read all the previous threads on this subject and saw that even I had such an issue way back in 2016 but there was no indication of how to cure this problem other than a battery removal.
HONEYWELL, THIS IS A MAJOR SOFTWARE BUG IN THE CONTROLLER THAT HAS TO BE ADDRESSED. I really don't mind all the litte probelms that get raised here, in fact I quite enjoy reading about them but this is quite an unacceptable bug.
Thank heavens I do not use EvoHome to controller my hot water heating is all I can say. My house is full of software clocks and with the addition of Amzazon Spots I have two more. In all the decades of their use I cannot remember another example of a clock sticking!
It's the worst possible bug there can be - waiting for the noise of the HR92s to start at 07:02 and nothing happens.
Please Honeywell try and get to the bottom of this. I'm a great fan and been a user since the b/w system but this is just an unacceptable problem in such a critically important consumer household tool. Chris
Update: Looks like others had clock problems this morning - see thread: http://www.wordpress-1219309-4387497...0-17-03/page34 My clock was reading 05 something as well.
I tried the recommended of manually resetting the clock (which at least put my heating on) clicking on and off the automatic Wi-Fi update button several times but no avail. The clock just solidly remained at the time I manually set it to. I waited an hour but with no change.
I've read all the previous threads on this subject and saw that even I had such an issue way back in 2016 but there was no indication of how to cure this problem other than a battery removal.
HONEYWELL, THIS IS A MAJOR SOFTWARE BUG IN THE CONTROLLER THAT HAS TO BE ADDRESSED. I really don't mind all the litte probelms that get raised here, in fact I quite enjoy reading about them but this is quite an unacceptable bug.
Thank heavens I do not use EvoHome to controller my hot water heating is all I can say. My house is full of software clocks and with the addition of Amzazon Spots I have two more. In all the decades of their use I cannot remember another example of a clock sticking!
It's the worst possible bug there can be - waiting for the noise of the HR92s to start at 07:02 and nothing happens.
Please Honeywell try and get to the bottom of this. I'm a great fan and been a user since the b/w system but this is just an unacceptable problem in such a critically important consumer household tool. Chris
Update: Looks like others had clock problems this morning - see thread: http://www.wordpress-1219309-4387497...0-17-03/page34 My clock was reading 05 something as well.
Comment