I am hoping someone can help … I have 2 separate 1 way lighting circuits,
which are fed along with others from the same lighting MCB.
They control outside lights (low current 2 x 15w low energy
fluorescent on 1cc and 1 x 15w on the other)
They both work happily enough … now her ladyship has decided that she
would prefer it if these were now on a single cct … and worked off
either a single sw, or both switches now worked as 2 way switching.
This is a right pain in the rear end as walls are long finished
painted etc, … and don't want to start chasing walls for cables.
One of the cct's is an X.10 controlled item, using a standard Din rail mounted AD10 module … if I had something I could fit to be effectively an X.10 relay, could I `slave' the 2nd cct off the first. (assuming having 2 units set to same X10 address will not be a problem)
The units are driven by a Comfort unit.
Anybody come across anything like this. ?
which are fed along with others from the same lighting MCB.
They control outside lights (low current 2 x 15w low energy
fluorescent on 1cc and 1 x 15w on the other)
They both work happily enough … now her ladyship has decided that she
would prefer it if these were now on a single cct … and worked off
either a single sw, or both switches now worked as 2 way switching.
This is a right pain in the rear end as walls are long finished
painted etc, … and don't want to start chasing walls for cables.
One of the cct's is an X.10 controlled item, using a standard Din rail mounted AD10 module … if I had something I could fit to be effectively an X.10 relay, could I `slave' the 2nd cct off the first. (assuming having 2 units set to same X10 address will not be a problem)
The units are driven by a Comfort unit.
Anybody come across anything like this. ?
Comment