Has anyone bound two zones (Controlled by T87RF or a DT92) to one BDR91? Bit complicated the way my towel rail circuit is set out, however I need two temperature sensors bound to one BDR91 to control the Towel Rail motorised valve. I'm assuming I can just set up another zone and bound it to the BDR91 without clearing the previous readings.
I would have tested this already however I haven't got any spare DT92e or T87RFs about to test so I need to acquire or buy one, hence the question. If it works I'll gladly go out and purchased one, just didn't want to be wasting £70+.
My other option is of course just to add another BDR91 to the zone valve (So it has two BDR91s controlling one valve) however I've already got 4 and finding space to fit another one maybe difficult!
I would have tested this already however I haven't got any spare DT92e or T87RFs about to test so I need to acquire or buy one, hence the question. If it works I'll gladly go out and purchased one, just didn't want to be wasting £70+.
My other option is of course just to add another BDR91 to the zone valve (So it has two BDR91s controlling one valve) however I've already got 4 and finding space to fit another one maybe difficult!
Comment