Add Extra Hr92 to Existing Zone

[mylesm]

Hi All

I have a Zone which has 2 Rads with 2 HR92 Actuators and a DTS92 as Temp Sensor working fine I now want to add an extra HR92 to this Zone is there an easy way to do this or do I have to delete zone and rebind everything again

Thanks

mylesm

[mylesm]

Hi All

I have a Zone which has 2 Rads with 2 HR92 Actuators and a DTS92 as Temp Sensor working fine I now want to add an extra HR92 to this Zone is there an easy way to do this or do I have to delete zone and rebind everything again

Thanks

mylesm

After looking at Zone Config on Evohome I added extra actuator and it showed 3 devices bound and new HR92 is showing Correct Zone name in its Display so I presume it will now work in conjunction with orignal 2

[rvb99]

No sure if you need to rebind the dts92 as the zone may take the sensor off the last HR92 added. Is a change in the dst92 setting being correctly reflected in the HR92s and is the desired zone temperature matching the dst92?

[mylesm]

No sure if you need to rebind the dts92 as the zone may take the sensor off the last HR92 added. Is a change in the dst92 setting being correctly reflected in the HR92s and is the desired zone temperature matching the dst92?

Dts92 is still working fine and reflecting in Evohome