If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Some Help Please With Multiple Zone Valves On Evohome
Can anyone provide further information on how to set up as above - 'Electrical underfloor - it just switches electrically'
I want to use a BDR91 to switch the pump on the UFH manifold, but don't want it to call for heat from the 'boiler' (or in my case thermal store)
How do I bind the BDR91 to get this behaviour? The only option I see is Underfloor Heating, not Electric underfloor heating and I couldn't get it to bind to the BDR91 under the UFH option!?
Any help appreciated.
Regards,
Scott.
Hi Scott,
what versino of the EvoHome controller have you got? I'm fairly certain mine has the option of Electric Heating (or something similar) on the zone setup. I'm not home until Thursday but can check then.
Comment