Hi guy's, first post so please forgive if this has been asked before
I am getting an Ideal Vogue C32 Gen2 boiler fitted next weekend and want to control it with Evohome, I have already got the connected thermostat pack with the BDR91, HR92s and the R8810A1018 opentherm bridge.
My heating engineer is experienced with the boilers but told me he has never fitted an Evohome controller before so the question is how difficult is it to connect Evohome to this boiler.
The boiler has a connection for an opentherm bridge so I was hoping it was a case of connecting the R8810 to this and configuring the system to use it.
Do I need the BDR91 and the opentherm bridge connected or just the R8810, After reading lots of posts on this forum I am quite comfortable with binding everything but just dont have a clue the best way to connect it to the boiler
Any advice would be appeciated
Stewart
I am getting an Ideal Vogue C32 Gen2 boiler fitted next weekend and want to control it with Evohome, I have already got the connected thermostat pack with the BDR91, HR92s and the R8810A1018 opentherm bridge.
My heating engineer is experienced with the boilers but told me he has never fitted an Evohome controller before so the question is how difficult is it to connect Evohome to this boiler.
The boiler has a connection for an opentherm bridge so I was hoping it was a case of connecting the R8810 to this and configuring the system to use it.
Do I need the BDR91 and the opentherm bridge connected or just the R8810, After reading lots of posts on this forum I am quite comfortable with binding everything but just dont have a clue the best way to connect it to the boiler
Any advice would be appeciated
Stewart
Comment