Is it possible to get an HR92 to display the temperature it is actually sensing ?
I have just installed a YT87 into my living room zone which has two HR92s. The valves are set to display the “room temperature” rather than the setpoint. However, they are displaying the same value as on the YT87.
Is there a setting to get the HR92 to display the current temperature it is individually reading ? (And if not, why not ) e.g. in my setup I would expect the Stat and each valve to possibly be showing different temperatures.
Is the temp displayed the real temperature (rounded to 1 deg obviously) or is it in some way modified by the calibration offset or other factor ?
I have just installed a YT87 into my living room zone which has two HR92s. The valves are set to display the “room temperature” rather than the setpoint. However, they are displaying the same value as on the YT87.
Is there a setting to get the HR92 to display the current temperature it is individually reading ? (And if not, why not ) e.g. in my setup I would expect the Stat and each valve to possibly be showing different temperatures.
Is the temp displayed the real temperature (rounded to 1 deg obviously) or is it in some way modified by the calibration offset or other factor ?
Comment