Results 1 to 2 of 2

Thread: Infinite Prime Help needed

  1. #1
    Automated Home Lurker
    Join Date
    Aug 2018
    Posts
    4

    Default Infinite Prime Help needed

    Hi

    I have an Infinite Prime alarm ( Pro installed 5years ago).
    Alarm worked fine till I had to replace batteries in 2 PIRís & a door mag. Also install/reg a Infinite w/less keypad, & a Infinite W/less smoke detector .
    All were registered/tested successfully, which pleased me no end , as I am a newbie.
    Trouble was, only the control panel speaker would work, & not the wired/wireless siren,
    So followed the INF-WES (w/less siren. Itís also wired to 12v transformer) reg instructions, & re-registered the siren. Which worked fine, sound & strobe.
    But then when I ran tests in Services(interface, Walk,transmitters) nothing worked, also all the Zones , W/less keypad, & W/less smoke alarm had been de-registered.
    I noticed (belatedly) that at the top of the INF-WES install instructions it says ďdo not install the siren until registration & testing is complete ď
    So my question is do I disconnect the backup battery & 12v transformer(so the INF-WES is not connected to control panel) before re-registering & testing all zones, & devices?
    Then re-install & register the siren.

    Kind Regards

  2. #2
    Automated Home Lurker
    Join Date
    Aug 2018
    Posts
    4

    Default

    All sorted, I didnít read instructions correctly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •