I awoke this morning to hear my boiler fire up (05:15). Nothing is set to come on at that time. I checked all zones and all are showing they are above the set temperature, way above, yet two whilst showing an actual temperature much higher than that set, by at least 9 degrees more, indicate there has been an override yet nobody has done that during the night or now (just fired again). Plus the self set override is seeking a temperature that is a lot less than the actual temperature, so should not trigger the boiler, if readers follow me.
The Control Panel showed one override as one set by the app (picture of phone in it) and the other as if set from the Panel. The log does not show any faults and is clear.
I cancelled the odd overrides and all then seemed OK again.
A phantom interference. Anybody any ideas? The version data reads Application Software 2.00.17.03 and Wi-fi Software 2.00.17.00
The Control Panel showed one override as one set by the app (picture of phone in it) and the other as if set from the Panel. The log does not show any faults and is clear.
I cancelled the odd overrides and all then seemed OK again.
A phantom interference. Anybody any ideas? The version data reads Application Software 2.00.17.03 and Wi-fi Software 2.00.17.00
Comment