Results 1 to 3 of 3

Thread: Evohome App / Water Temp issue

  1. #1
    Automated Home Jr Member
    Join Date
    Sep 2018
    Posts
    14

    Default Evohome App / Water Temp issue

    Hello,

    New Evo Home user here on my selbuild house.All sorted ( I think ) except for this ..... see pic. On the Evo home display its right and reacts to temp increase ( mug of warm water as system has not been run yet). I am right in thinking the water temp should be where the RED arrow points ? Its the same on the Web login too.

    Be grateful for some advice.

    Many thanks.

    EVO.jpg

  2. #2
    Automated Home Lurker
    Join Date
    Sep 2018
    Posts
    5

    Default

    This is a phantom zone, contact Honeywell support they will sort out this issue for you.
    Also check out the firmware of your controller (settings then hold device settings) my application is 2.00.17.03 and Wi-Fi is 2.00.17.00

  3. #3
    Automated Home Jr Member
    Join Date
    Sep 2018
    Posts
    14

    Default

    Thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •