Evohome App / Water Temp issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Fly100
    Automated Home Jr Member
    • Sep 2018
    • 29

    Evohome App / Water Temp issue

    Hello,

    New Evo Home user here on my selbuild house.All sorted ( I think ) except for this ..... see pic. On the Evo home display its right and reacts to temp increase ( mug of warm water as system has not been run yet). I am right in thinking the water temp should be where the RED arrow points ? Its the same on the Web login too.

    Be grateful for some advice.

    Many thanks.

    EVO.jpg
  • edhodges1984
    Automated Home Lurker
    • Sep 2018
    • 7

    #2
    This is a phantom zone, contact Honeywell support they will sort out this issue for you.
    Also check out the firmware of your controller (settings then hold device settings) my application is 2.00.17.03 and Wi-Fi is 2.00.17.00

    Comment

    • Fly100
      Automated Home Jr Member
      • Sep 2018
      • 29

      #3
      Thank you.

      Comment

      Working...
      X